Technical Specifications
| S.No. | Test Description | ISO 13006:2018 / EN 14411 Group BIa Requirement | IS - 15622:2017Group B1b | Johnson Endura Edc | Test Method | |
| 1.0 cm | 1.2 cm | |||||
| A) Dimension Quality | whichever is less applicable. Rectified | Rectified | ||||
| 1 | Deviation in Length & Width | ± 0.3% or ±1.0mm | ±0.1% | ±0.1% | ±0.1% | ISO 10545-2 / IS 13630-1 |
| 2 | Deviation in Thickness | ± 5% or ± 0.5mm | ±5% | ±4% | ±4% | |
| 3 | Straightness of Sides | ± 0.3% or ±0.8mm | ±0.1% | ±0.1% | ±0.1% | |
| 4 | Rectangularity | ± 0.3% or ± 1.5mm | ±0.1% | ±0.1% | ±0.1% | |
| 5 | Surface Flatness | ± 0.4% or ±1.8mm | ±0.5% | ±0.3% | ±0.3% | |
| 6 | Surface Quality | Min 95% | Min 95% | Min 95% | Min 95% | |
| B) Physical Properties | ||||||
| 1 | Water Absorption | <0.5%, individual Max 0.6% | 0.08%<E<3, Individual 3.3 max | <0.5% | <0.5% | ISO 10545-3 /IS 13630-2 |
| 2 | Scratch Hardness of Surface (Moh's scale) | _ | >5 | >6 | >6 | IS 13630 part 13 |
| 3 | Flexural Strength (Average MOR) | >35N/mm², Individual 32N/mm2, Min | >30N/mm², Individual 27 min | >35N/mm² | >38N/mm² | ISO 10545-4 / IS 13630-6 |
| 4 | Breaking Strength | >1300 N | >1100 N | >1800 N | >3000 N | ISO 10545-4 / IS 13630-6 |
| 5 | Impact Resistance | Report value | >0.55 | >0.55 | >0.55 | ISO 10545-5 / IS 13630-14 |
| 6 | Crazing Resistance | Report cycle | 4 cycle | No damage | No damage | ISO 10545-11 / IS 13630-9 |
| 7 | Surface Abrasion Resistance (PEI Rating) | Report abrasion class | Class II, Min | Min PEI IV | Min PEI IV | ISO 10545-7 / IS 13630-11 |
| 8 | # Skid Resistance | |||||
| a) Skid Resistance - Ramp Test | Manufacturer to declare | Manufacturer to declare | >R9 | >R9 | DIN 51130 | |
| b) Coefficient of Friction | Manufacturer to declare | Manufacturer to declare | >0.42 | >0.42 | ISO 10545 -17 /ANSI A 326.3 | |
| 9 | Bulk Density, in (g/cc) | >2.0 | >2.0 | >2.2 | >2.2 | ASTM C373-16 / IS 13630-2 |
| 10 | Moisture Expansion | Manufacturer to declare | Max 0.02 mm/m | <0.02 mm/m | <0.2 mm/m | IS 13630-part 3 / ISO 10545-10 |
| 11 | Frost Resistance | Manufacturer to declare | Manufacturer to declare | No damage | No damage | ISO 10545-12 / IS 13630-10 |
| 12 | Color Resistance to UV Light | Report result | Report result | No change in color | No change in color | DIN 51094 |
| C) Chemical Properties | ||||||
| 1 | Resistance to Chemicals | ISO 10545-13 / IS 13630-8 | ||||
| 1) Resistance to Low concentrations of acids & alkalies | report resistance class | report resistance class | GLA/AA | GLA/AA | ||
| 2) Resistance to High concentrations of acids & alkalies | report resistance class | report resistance class | GHA/AA | GHA/AA | ||
| 3) Resistance to household chemicals and swimming pool salts | GB min | AA min | GB( ISO )/AA(BIS) | GB( ISO )/AA(BIS) | ||
| 2 | Stain Resistance | Min Class 3 | Class 1 min | Resistant | Resistant | ISO 10545-14 / IS 13630-8 |
| D) Thermal Properties | ||||||
| 1 | Linear Thermal Expansion | Report value | <7x10-6K-1 | <7x10-6K-1 | <7x10-6K-1 | ISO 10545-8/ IS 13630-4 |
| 2 | Thermal Shock Resistance | _ | 10 Cycle , Min | No damage | No damage | ISO 10545-9/ IS 13630-5 |
